|Grade||Genuine Rolex||3a swis||swiss||automatic|
|Movement||Rolex Calibre 3235||Genuine Swiss Clone 3235 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Engine||Rolex Calibre 2836/2813|
Dial Markers: Index. The watch uses some simple indexs as dial markers unlike a normal dial, you can see the time by looking at the index.
Bezel Material: Stainless Steel. The stainless steel bezel material is one of the best materials for watches. It has high dimensional stability, high resilience and UV resistance. It can be used in both hard and soft cases. It’s also resistant to water, heat and deliquescent substances like oil or food.
Hand: Silver-tone. As you can see in the pictures above, the hand design of the watch is silver-tone which is pretty cool and fashionable.
Second Markers: Minute Markers around the outer rim. The second mark on the minute mark of the watch around the outer rim.
Function: Date, Hour, Minute, Second. Re-engraved watch function, with second hand, minute hand and hour hand at the same time.
Case Back: Solid. Patek Philippe often uses a solid bottom cover, which is the “second skin” of the watch. It covers metal and provides daily wear protection for the watch.
Luminiscence: Hands and Markers. The luminiscence of the replica watch is hands and markers. It can help you know the corresponding time when you running in dark.
Band Material: 316L. Our watch band is made of 316L, the density component is close to iron, and generally does not affect the human body. This material is often used in the straps of Swiss watches.
Crystal: Sapphire Crystal. Sapphire crystal is the impact resistance, air tightness and hardness of sapphire higher than other materials, and the processing cost is also high, so it is mostly used in top watch brands. Tips: The A Replica is applied with mineral glass instead of sapphire.
Watch Case: 316L. The case is made of the best 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.